Toilet Cistern Fill Valves and Flush Valves

 

 

 

 

 

 

 

Bottom Entry Brass Tail

  • Easy fit
  • Fast fill
  • Height adjustable
  • Removable filter
  • Adjustable anti-siphon
  • Suitable for pressures up to 100psi
  • Available in both 10mm and 15mm inlet

Part Number:
VFVBE/10BT for 10mm inlet
VFVBE/15BT for 15mm inlet

 


Side Entry Brass Tail

  • Easy fit
  • Fast fill
  • Removable filter
  • union connection inside cistern
  • Adjustable anti-siphon
  • Suitable for pressures up to 100psi
  • Available in both 10mm and 15mm inlet

Part Number:
VFVSE/10BT for 10mm inlet
VFVSE/15BT for 15mm inlet


Dual Flush Valve

  • Available with either 40mm or 50mm Outlet (40mm does not include doughnut ring)
  • Complete with CP flush button
  • Extended thread length to enable a flush pip to be connected if required. Any excess thread can be cut off when connecting to close coupled suites.
  • Doughnut ring included for close coupled suites if required (50mm only)
  • Extra flanges in chrome and white to enable the flush buttons to fit most cisterns using one outside the lid and the other inside as a backing flange, you choose.

 

 

INSTALLATION GUIDE FOR THE BUTTON SET

Part Number:
VDFV/40 for 40mm outlet
VDFV/50 for 50mm outlet

 FLUSH VALVE

I


Inwall Cistern Flush Valve

MULTI-FIT – FITS MOST INWALL CISTERNS

Attention:
To fit the flush valve in an inwall cistern adequate access is required at the top and bottom of the cistern, preferably behind the cistern.

  • Adjustable height overflow
  • Top entry cable to avoid obstructions inside cistern
  • Adjustable half and full flush
  • Complete with CP flush button and extended cable 450mm long
  • Available with 50mm outlet
  • Extra flanges in chrome and white to enable the flush buttons to fit most installations using one outside the wall and the other inside as a backing flange, you choose.

Part Number:
VDFV/50/IW

Inwall Flush Valve